Browse Category: Technology

Self-Driving-Car-Waymo

How Close are we to developing Self-Driving car Technology?

If you are curious about how close we are to developing self-driving cars technology then this is the article you are looking for.

In this article, we’re going to look at four major things which show how close we are to developing self-driving car technology. First, we’re going to talk about different levels of self-driving cars technology.Next, we’re going to talk about limitations in software and hardware technology used in self-driving cars. Thirdly we are going to talk about government regulations.Finally, we’re going to finish up with safety. After reading this article, you will have a good idea on how close we are to developing self-driving cars technology.

First, let’s talk about different levels of self-driving cars technology.When it comes to self-driving cars there are four levels, with capabilities increasing at each level.

The lowest level is level 2 and the highest level is level 5.Level 2 cars are able to control both steering and brakes under certain circumstances. Level 3 can drive with the assistance of a human under certain conditions. Level 4 cars can drive almost like a human being but only within a very well-mapped geographic area.When we are talking about self-driving cars we are really talking about level 5 cars which can drive like a human in any geographic area.

Secondly, let’s about the software and hardware limitations.Self-driving cars use cameras, radars, and sensors as their hardware to collect data regarding their environment.

Although the hardware’s are at a stage where it is capable of allowing the cars to be fully autonomous in most circumstances, the software that goes along with it is not. One of the reason is that the software used in self-driving cars depend on a technology called deep learning.It requires a ton of data to analyze and create an accurate picture of the environment around the car.This technology is still in its growth stage.

Closely related to the lack of insufficient data for the software to analyze is government regulations.

Thirdly let’s talk about government regulations.For the self-driving cars to hit the roads, the governments have to pass laws regarding their usage.

They have to develop clear guidelines regarding the development and real-world usage of self-driving cars by consumers.

Self-driving cars software depends on the data collected by their hardware.If a sufficient number of test cars are not allowed to travel through regular roads, the data gathered will be less and also not useful for feeding the deep learning software systems.

When forming laws and regulations, governments have to take a lot of things into consideration.

Fourthly let’s talk about safety.It is expected that with self-driving cars there will be fewer accidents.

But to reach a stage like that is still farther than we expect.Self-driving cars right now and coming in the next few years will be assisted by humans.Laws will be established such that only self-driving cars that can easily be taken over by a human will be allowed through roads to ensure safety.

According to Tesla’s Elon Musk, fully self-driving cars will be available within the next 3 years.But according to industry experts, a more realistic projection where a customer can buy a fully autonomous car is close to 10 years from now.There you go, now you have a good idea on how close we are to developing self-driving cars technology.

best midrange headphones

The Most Reliable Mid-Range Headphones


Nowadays, almost everybody owns a laptop or a mobile device; consequently, headphones have become a big deal. For just a few dollars or thousands of dollars, you will definitely get a brand that will match your interests. The question is, are expensive headphones worth it? Or should just get a Mid-range headphone? Below I have outlined some of the best midrange earphones you should consider buying.

1. RHA S500i

• RRP: $39.95 inc VAT
These headphones will provide you excellent value for your money. They are high performing and affordable to most people unlike the high end headphones that go for even $400 a piece. They are characterized by a mid centric and a minimalist design a package that will definitely impress you. This set of headphones is a wonderful performer that rivals even the performance of some high end headphones. It is definitely the Best Mid-range headphones in its own class. You will not regret buying this. It even works with the old fashioned PCs and laptops. You are all definitely covered.

2. Sennheiser HD 429

• RRP: $45 inc. VAT
You do not have to spend several hundreds of dollars for a good headphone. This piece has quality sound that can even rival those of headphones going for more than $300. They are designed with high end looks and though they are small, they will definitely satisfy your need for bass and high quality sounds. Spending money on this piece is really worth it; in addition, this headphone is fit for all of our budgets. You no longer have the reason why you should not get this piece.

3. Creative Sound Blaster JAM Bluetooth Headphones 

• RRP: $39.99 inc. VAT
This headphone is in the class of the Best Mid-range headphones. Its comfort and audio quality will exceed all expectations that you may have had. It is very lighweight and you will hardly realize that you are wearing headphones. Though they do not fold to enhance portability, these pieces of art are small enough to fit in your smallest coat pocket. My personal point of view, these headphones are much better than the highly publicized high end headphones. You will surely enjoy the bass from them

4. Audiomax HB-8A Bluetooth Headphones

• RRP: $45.99 inc. VAT
If you have been looking for quality in the Best Mid-range headphones, Audiomax HB-8A Bluetooth Headphones will definitely complete it for you. With this earphone, you will get all the features in a high-end headphone. There is no need to spend a lot money on very expensive pieces and this one gives you all you may want. It features comfort, a longer battery life a stylish performance and a wonderful sound performance. This is a piece you would definitely want to try considering what it offers and how much it costs.
 

5. OnePlus Icons 
• RRP: $39 inc VAT
Among Best Mid-range headphones, the OnePlus is the most impressive headphone for several reasons. For just less than £40 you get a beautiful design and high quality. These headphones sound better than any common headphones. There sound and design is even comparable to that of high-end headphones. If you are looking for quality at a constrained budget, these are the pieces you can bet on for a low price and high performance.

For more great information on headphones, I’d recommend checking out www.headphoneshound.com. They do headphones reviews, and they have info a ton of different models and brands of headphones.

3d printer

Are 3D Printers the future?

Additive manufacturing, which is another name for 3-D printing, is a term that refers to the process of synthesizing solid three-dimensional objects from a digital file. Nowadays it is definitely changing the way we produce things- tools, clothing, car parts, toys and food. Smaller and consumer-friendly 3-D printers are now available on the market for homes and private businesses.

The first step in printing an object is creating its blueprint in modeling software and saving it. When the saved data is input, material (most commonly plastic) begins to melt with heat created by lasers, then deposits and instantly cools down creating solid matter. This process is repeated until the structure is fully formed by layering.

Latest 3-D printers have nano-precision and hence can create incredibly fine details. The technology used to produce structures on a nanometer scale is called two-photon lithography. It was introduced by researchers at the Vienna University of Technology who managed to speed up the process to the extent that they can even produce body parts. One indicator of big improvement is that printing speed was measured in millimeters per second and this new device can do five meters in only one second.

Since the beginning of the 21st century, biotech companies made efforts to research possible methods of human tissue engineering using 3-D printing in order to be able to build body parts and organs. This became doable with the use of the inkjet techniques by depositing living cells layer by layer on a gel medium and gradually building up to create 3-D structure. Utilization of 3-D printing in medicine is referred to with the term bio-printing. This field has exponential growth and new acquirements are seen on a daily basis.
Another important role in modern 3-D printing was played by chemists. The resin contains photoactive cells which are activated when they absorb two photons of the laser beam at once – this happens only in the center of the laser beam. These cells are actually initiators of a chain reaction in other components in resin. Opposed to commonly used 3-D printing techniques, solid material can be created anywhere within the resin. This saves a lot of time in the entire producing process.

Lately, researchers at Princeton University printed bionic human ear, which uses biology electronics and can receive signals up to million times higher than an average human ear. 3-D printers in China built 10 houses in a day with costs lower than 5,000 $ per house. It is also predicted that NIke could be only software company in just ten years time, thanks to 3-D printing. It is obvious that these machines are just becoming more powerful. So, we can definitely expect printed future with low expenses and fascinating inventions.